mercedes aclass

Successful Production Launch of the A-Class Plug-In Hybrid at the Mercedes-Benz Rastatt Plant

Rastatt. The electric initiative in the Mercedes-Benz Cars global production network has reached its next milestone: the production launch of the first Mercedes-Benz compact vehicles with plug-in hybrid drive at the Mercedes-Benz Rastatt plant in southern Germany is an important strategic step for the plant, and was successfully implemented. Supported by a systematic digitisation of production processes, Mercedes-Benz Rastatt plant and its highly skilled team have implemented the simultaneous ramp up of two body variants: the A 250 e (combined fuel consumption 1.5-1.4 l/100 km, combined power consumption 15.0-14.8 kWh/100 km, electric range 74 km, combined CO2 emissions 34-33 g/km)[1] plus the A 250 e Sedan (combined fuel consumption 1.4 l/100 km, combined power consumption 14.8 -14.7 kWh/100 km, electric range 75 km, combined CO2 emissions 33-32 g/km)1. The Mercedes-Benz A and B-Class with hybrid drive celebrated their world premiere at the 2019 International Motor Show (IAA) in Frankfurt am Main in Germany. Plug-in hybrids are an important milestone on the road to emission-free driving. The focus of the new compact vehicles with plug-in hybrid drive EQ Power is on (electric) driving pleasure and everyday usability. The electric range consists of 70 to 75 km (NEFZ). By 2039, Mercedes-Benz Cars is targeting a CO2-neutral new car fleet, and by 2030 the company is already targeting more than 50% of passenger car sales from plug-in hybrids or full-electric vehicles. This also applies to the production process itself: since 2011 the Mercedes-Benz Rastatt plant has already implemented various measures which have nearly halved the specific CO2 emissions per vehicle in production.

"The production launch of the Mercedes-Benz A-class in two plug-in hybrid models is a strategic milestone as part of our global electric initiative. We are thus increasing the Mercedes-Benz plug-in hybrid offering and expanding it to include our high volume compact car segment for the first time. By simultaneously launching production of two A-Class plug-in hybrid models, the Mercedes-Benz Rastatt plant once again demonstrates its enormous flexibility and efficiency in the Mercedes-Benz Cars global production network. The Mercedes-Benz Rastatt plant is therefore optimally prepared for the upcoming production launch of the hybrid B-Class," says Jörg Burzer, Member of the Board of Management of Mercedes-Benz AG, responsible for Production and Supply Chain Management.

Supported by a host of digital processes, such as working with mobile devices, automatically guided transport systems (AGVs) and a paperless factory, Rastatt plant employees can respond flexibly and efficiently to a various customizations, such as optional extras and drive variants. Mercedes-Benz Cars’ high production standards in ensure high quality around the world and across all vehicle types.

"In producing the new A-Class with EQ Power, the Mercedes-Benz Rastatt plant is beginning a new era and reinforcing its importance in the global Mercedes-Benz Cars production network. Our team has prepared meticulously for this new challenge and have once again confirmed what they stand for: first-class quality, competence and also outstanding performance. The Rastatt plant and its highly motivated staff are also superbly positioned to produce the forthcoming compact Mercedes-Benz electric vehicles," says Thomas Geier, Site Manager of the Mercedes-Benz Rastatt plant.

The A-Class with plug-in hybrid drive is being produced on the same line at the Mercedes-Benz Rastatt plant as models with conventional drive systems. The production of vehicles with different drive types can therefore be adapted flexibly and efficiently. The plant is thus working at optimal capacity and the Mercedes-Benz high production and quality standard are guaranteed.

"The Rastatt plant is already on the road to transformation, moving towards new technologies, drive system types and changes to the scope of work. As part of this, the ramp up of the compact plug-in hybrids marks a milestone. Therefore, safety is a key issue: security of the site, of our colleagues' workplaces, of the region and of the future of our workforce. The future is ours because of the safeguards we are putting in place," says Murat Sür, Chairman of the Works Council at the Mercedes-Benz Rastatt plant.

The Mercedes-Benz Rastatt plant gained its initial experience building electric vehicles from 2014 to 2017. During this period the B 250 e (combined power consumption 16.6 kWh/100 km, combined CO2 emissions: 0 g/km)[2] , a vehicle with an all-electric drive system and a standard range of up to 230 kilometres, was produced.

Sustainable mobility throughout the entire value-added chain

With the production of hybrid vehicles and of the upcoming electric vehicles, the Mercedes-Benz Rastatt plant is making an important contribution to "Ambition 2039." This is how Mercedes-Benz Cars refers to its ambitious path toward sustainable mobility and increased climate protection throughout the entire value-added chain. By 2039, the Group is aiming for a carbon neutral new passenger car fleet, and by 2030 Mercedes-Benz aims to reach more than half of the world's passenger car sales with plug-in hybrids or purely electric vehicles.

When it comes to carbon-neutral production, two levers are used: the efficient generation of energy and the reduction of energy consumption. With technologies such as co-generation of heat and electricity (CHP), heat exchanger systems or heat recovery, the Mercedes-Benz Rastatt plant has succeeded in reducing the specific CO2 emissions per vehicle in production almost by half since 2011. A further example is the new energy and environment information path at the Mercedes-Benz Rastatt plant. The next big project is already on the agenda: by 2022 the power for the Mercedes-Benz Rastatt plant, as well as in Mercedes-Benz’s other European plants, is expected to come entirely from renewable sources such as wind, solar and hydroelectric power.

Electric driving pleasure thanks to efficient high-tech components

The hybrid module which drives the A-Class is extremely compact: the electric motor is integrated into the eight-speed dual clutch transmission. For the first time on a Mercedes-Benz vehicle, the combustion engine is started exclusively by the electric motor - the compact hybrids do not have a separate starter. The electric machine can reach 75 kW. Together with the 1.33-litre four-cylinder engine, this produces a system output of 160 kW (218 hp) and a system torque of 450 Nm. Thanks to the electric motor’s EQ Power, these vehicles respond to the accelerator pedal very rapidly and deliver impressive performance: the A 250 e, for example, accelerates from 0 to 100 km/h in 6.6 seconds, with a top speed of 235 km/h.

A lithium-ion high-voltage battery, which has a total capacity of approximately 15.6 kWh, serves as an electric energy storage unit. It can be charged at an external AC or DC electric energy source. The high-voltage batteries are produced from the wholly-owned Mercedes-Benz subsidiary Accumotive. Since 2012, battery systems for electric and electrified vehicles from Mercedes-Benz and smart as well as commercial vehicles are produced in Kamenz in the east of Germany. The site in Kamenz, consisting of two battery factories, is state-of-the-art and one of the largest in the global automotive industry. In total, the battery production network of Mercedes-Benz Cars will consist of nine factories at seven locations on three continents.

Further information about Mercedes-Benz A- and B-Class with EQ Power:

About the Mercedes-Benz Rastatt Plant

The Mercedes-Benz Rastatt plant in the south of Germany has a workforce of over 6.500 people, making it the region's largest employer. Rastatt is the lead plant for the worldwide production of compact cars within the global production network of Mercedes-Benz. The A-Class Sedan, A-Class and B-Class as well as the compact SUV GLA are manufactured here. The production network for compact vehicles also includes the plant in Kecskemét, Hungary (A-Class, CLA Coupé, CLA Shooting Brake), at Chinese production location BBAC (A-Class L Sedan, GLA, GLB), the COMPAS joint-venture production plant in Mexico (A-Class Sedan, GLB) and a plant in Hambach, France. Compact Mercedes-Benz electric vehicles of the EQ product and technology brand will roll off the production lines in Rastatt and Hambach in future.

* The figures are provided in accordance with the German regulation 'PKW-EnVKV' and apply to the German market only. Further information on official fuel consumption figures and the official specific CO₂ emissions of new passenger cars can be found in the EU guide 'Information on the fuel consumption, CO₂ emissions and energy consumption of new cars', which is available free of charge at all sales dealerships, from DAT Deutsche Automobil Treuhand GmbH and at

[1] The stated figures are the measured "NEDC CO2 figures" in accordance with Art. 2 No. 1 Implementing Regulation (EU) 2017/1153. The fuel consumption figures were calculated based on these figures. The range and the power consumption have been determined on the basis of Regulation (EC) No. 692/2008. A different value is applied in accordance with EmoG. A higher figure may apply as the basis for calculating the motor vehicle tax. Further information on the official fuel consumption and the official specific CO₂ emissions of new passenger cars can be found in the "Leitfaden über den Kraftstoffverbrauch, die CO₂-Emissionen und den Stromverbrauch neuer Personenkraftwagen" [Guide to fuel consumption,CO₂ emissions and electricity consumption for new passenger cars], which is available free of charge at all sales outlets and from Deutsche Automobil Treuhand GmbH at

[2] Power consumption and range have been determined on the basis of Regulation (EC) No. 692/2008. Power consumption and range depend on the vehicle configuration.

Mercedes plant
Mercedes plant